Squelch is a 14-part deep dive into the conventional scanner in GopherTrunk — the scan list. A trunked system announces every call on its control channel; a scan list has nothing of the kind. It has to decide from the air alone whether a channel carries a call, and it has to decide again for every channel on every pass.

The series takes that decision apart one gate at a time. It starts with the dwell loop, then the squelch that turned out to measure the whole SDR span instead of the channel, the noise squelch that works when an AGC makes a level meaningless, and offset tuning. Then the tone gates — CTCSS tones 2.3 Hz apart and the real DCS codeword — and AM, which squelches on carrier-to-noise. Then the digital channels, where a carrier is not a call: the gates for P25, DMR, System Fusion, NXDN and D-STAR. The last parts cover carriers that come in bursts, data decoders riding scan list channels, the one front end every narrowband decoder now shares, and the controls an operator turns.

The running thread comes from The Analog Edge: never gate a decision on absolute dBFS when a scale-invariant statistic exists. Almost every gate in this series began as a level threshold and was replaced by a measurement that reads the same at any gain. The Cookbook gave the scan list one recipe and Protocol Decoders one episode; this series is the full depth, with the measurements behind each default and an honest list of what has not yet been run on air.

Every post reads three ways: a TL;DR + cheat-sheet for skimmers, bold headers, tables, and diagrams for the medium read, and full prose with real code for the deep read.

New here? Start with Talkgroups and scan lists in the Scanning module for the lay of the land, then come back for how the gates work.<p class="post-list__empty">No posts in this series yet — check back soon.</p><p class="blog-feed-link"> See all deep dives or subscribe via RSS. </p>